Build a projector with a smartphone - how it works
You can easily build a projector with your smartphone. Read in this practical tip how this works.
Building a projector with a smartphone - you need that
- carton
- Black cardboard or black spray
- Black tape
- Cuttermesser
- tongs
- wire
- magnifying glass
Build a projector with your smartphone - this is how you proceed
- Start by darkening the inside of the box with the black cardboard or the black spray from the inside, so that no light can enter.
- Use the cutter knife to cut a hole in one end of the box that is large enough for the magnifying glass.
- Then attach the magnifying glass to the hole with tape. Make sure that no light can get through the opening here either.
- Use the wire to build a holder for your smartphone so that it sits firmly. Before doing so, turn off the automatic display rotation on the smartphone and set the brightness to 100%.
- Put the cell phone with the holder in the box with the screen for a magnifying glass and switch off the light in the room.
- If the image is still out of focus, change the distance between the smartphone and the magnifying glass.
- The physicist Philip Häusser gives you detailed instructions in this video.
In the next practical tip, we will tell you how to connect your Android smartphone to a projector.