Fritzbox: Connect and use the surveillance camera

You can also connect and use your surveillance camera with the Fritzbox. In this practical tip, we will tell you how to do this.

Connect and use the surveillance camera with Fritzbox - how it works

1. Open "fritz.box" in your browser and enter the stored password, if you have set one.
2. Then go to "Home Network"> "Home Network Overview"> "Network Settings"> "IPv4 Addresses" and activate the DHCP server here.
3. Activate the DHCP server in the surveillance camera. In the operating instructions you will learn how to do this.
4. Connect the surveillance camera to the Fritzbox either via LAN or WLAN.
5. If you also want to access the surveillance camera from outside, release the ports in the Fritzbox.
6. You must also enter the IP address of the camera, which you can find on the Fritzbox overview page, under "MyFritz".
7. Finally, you need a free MyFritz account so that you can also access the camera via the Myfritz page.

In the next practical tip, read how you can connect a hard drive to the Fritzbox.