Fritzbox: DSL LED flashes - it could be because of that

If the DSL LED on your Fritzbox is flashing, this is usually no cause for concern. Find out in our practical tip what it could be.

DSL-LED of the Fritzbox flashes - these are the causes

As soon as this LED on the router flashes, this indicates a connection error:

• Therefore, check that the router is connected correctly and that all cables are properly seated.
• If you have discovered a defective cable, you should replace it as soon as possible.
• Then switch to the administration interface of the Fritzbox by entering "fritz.box" in your browser.
• Once there, click on "System" and finally "Events" and look at the log.
• If "DSL does not answer" is displayed there, the router cannot establish an Internet connection.
• Therefore, check your DSL settings in the router. You may have to enter the data again.
• Resetting the Fritzbox can also be helpful.
• If you cannot solve the problem in this way, contact your provider and describe the situation to them.

FritzBox with FritzOS - 11 tips in the workshop

In our next practical tip, read what you can do if you don't have access to the Fritzbox.

DSL comparison calculator

in cooperation with communicationAds.net