Homematic: teach roller shutter actuator - how it works
When setting up your smart home with HomeMatic components, you have to train the roller shutter actuator. In this practical tip we will show you how.
HomeMatic: Teach roller shutter actuator - how it works
To teach the shutter actuator, open the HomeMatic WebUI user interface in your browser.
- In the user interface you will see the "Teach devices" item at the top right.
- Click here on the "Teach HM device" button.
- Now you have 60 seconds to connect the device to be learned to the control center. To do this, press the Config button on the device. You will find this below the seesaw.
- If this has worked, the taught-in device does not yet appear in the HomeMatic Central CCU2. Before the roller shutter actuator is displayed here, you must first confirm the device.
- To do this, click on the inbox. The shutter actuator should also be visible here. If you click "Set" here, you can make the desired basic settings for the roller shutters.
- Click on "OK" to apply the settings and the roller shutter actuator is taught.
We will show you in another practical tip how to activate the HomeMatic expert mode for your Smart Home.