Setting up a Horizon receiver - Instructions

You can set up the Horizon receiver in just a few simple steps. In our practical tip, we will show you how to do this step by step.

Step by step: How to set up the Horizon receiver

It only takes a few steps to put the Horizon receiver into operation. We show you how it works in these instructions:

First connect the antenna cable. With a three-hole socket, insert the cable into the lower opening; with a two-hole socket, use the supplied adapter and insert it into the right opening. Connect the other end of the antenna cable to the Horizon receiver. Here you will find the name "COAX IN".
Now use the HDMI cable. Plug it into the desired HDMI slot in the TV and into the "HDMI OUT" on the Horizon receiver.
Then connect the power cable to the socket and the other end to the opening under the on and off switch on the Horizon receiver.
Switch on the receiver in the last step using the switch.

After you have connected the Horizon box, you have to make a few more settings. Here's what you need to do:

Turn on your TV first and then select the HDMI slot.
Pull the yellow adhesive strip from the remote control and then select the "OK" button. The TV and the Horizon receiver now establish a connection.
Then follow the on-screen instructions to customize the Horizon receiver. For example, you can activate or deactivate the power saving mode and have series and films suggested based on your previous television habits.

Another practical tip shows you how high the Horizon receiver's power consumption is.