Open iPad - how it works
If you want to save yourself the cost of a repair, you can also open your iPad yourself. To do this, however, you need a special tool and a lot of skill. We'll show you exactly how to proceed.
Open iPad yourself - you have to be aware of that
Unlike other tablets, you cannot simply remove the back of the iPad by hand. Instead you need a special tool kit with which you can separate the display and the back. However, please note that the guarantee will be void when you open it.
- Before you open your iPad, you should switch it off completely and remove the SIM card.
- Then place the metal spatula between the display and the aluminum back of the device and carefully pry both of them open. It is best to start at the side without buttons. Please note that the rubber still belongs to the display.
- Once you have loosened all sides, you can carefully lift the display. For example, a suction cup can be used for this purpose, which you place on the iPad display.
- When opened, some of the springs, which normally press against the aluminum frame from the inside and hold it, can break off. Therefore, be particularly careful when you pry up the tablet and remove the display.
- Finally, you have to disconnect the three connecting cables. To do this, first remove the adhesive strip from the display cable, fold up the metal bracket and carefully pull the cable out of the connector.
- If you want to reassemble your iPad later, reconnect the cables to the correct contact and close the metal device.
If you are unsure, you should have your iPad opened and repaired by a professional. We will introduce you to three good iPad workshops in the next article.