Kobold VR200: import updates
So that the Kobold VR200 robot vacuum cleaner delivers even better results, the software for the VR200 is constantly being developed. Vorwerk provides the latest version free of charge on its website.
Transfer the software update for VR200 to the robot vacuum
The latest software version for the VR200 is available for download on the Kobold website. You must download this and save it on a USB stick:
- Create a folder on the USB stick with the name "RobotData".
- Save the downloaded update in the folder you just created.
- Then you have to open the cover of the robot vacuum and remove the rubber protection on the left side. A micro USB port is hidden here.
- Now insert the supplied USB adapter into the connector and connect the cable to the USB stick.
- By the way: You can find many other great tips on the Vorkwerk Kobold VR200 on our CHIP special page.
Install software update on the robot vacuum
- Call up the "Settings" in the menu and press "OK".
- Then navigate to "Software Update" and confirm again with "OK".
- Now you have to select the update and confirm that you want to install it on the robot vacuum.
- Now wait for the installation to complete. Then you can remove the USB cable again, attach the rubber protection and close the cover.
- Tip: The VR200 shows the currently installed software versions in the menu under "Info"> "Revision".
Buy Kobold VR200 robot vacuum online now