Change LNB - you should pay attention to that

The LNB is the signal amplifier on the satellite dish. If you want to change this, there are a few points to consider. In this practical tip, we will tell you what is important when changing.

Change LNB - you should pay attention to these points

In the event of a defect or poor reception on television, you should replace the LNB on the satellite dish.

• When buying the new LNB, make sure that it has sufficient connections. You can choose between one, four, six or eight connections, as required.
• Once you've got the new LNB, it's time to replace it.
• Be careful not to move the bowl, otherwise your transmitters may be gone.
• Carefully unscrew the screws of the old LNB and carefully remove the cables.
• Now place the new LNB in ​​the fixture and screw it in with the screws.
• Finally you have to screw the cables tight and make sure that all screws are tight.
• Test whether you now have a clear picture again. If this is not the case, you will have to realign your satellite dish.

In the next practical tip, read what you can do in the event of a short circuit on the LNB.