Open Mac Mini - Here's how
Related Videos: Here's how to upgrade the SSD on your MacBook to NVMe for cheap! (May 2024).
If you want to repair your Mac Mini yourself or replace hardware, you first have to open the small computer. In this practical tip we will show you how.
Open Mac Mini Tool
- Unfortunately, a normal screwdriver is not enough to open a Mac Mini. You need a special TR6 screwdriver.
- This loosens Torx screws with an integrated safety pin. You won't get far with normal tools. The essay is included in the following bit set.
- You should use plastic tools to loosen the plug connections. Such a tool is also included in the bit set above. Alternatively, you can also use an EC card.
Open Mac Mini - Instructions
Note: The following instructions refer to the current Mac Mini 2014. Make sure that you do not touch the circuit board or other sensitive components with a screwdriver. Even the smallest scratches can cause great damage.
- Disconnect the Mac Mini from all cables and turn it over. Put a towel or something underneath to prevent the Mac Mini from being scratched.
- Place a flat screwdriver on the side of the black cover and gently pry the cover away.
- Now remove all 6 screws with the special Torx screwdriver.
- Lift the lid and fold it aside. Attention: The lid is still connected to the Mac Mini by cable.
- Simply loosen the connection to the cable in the Mac Mini using a screwdriver.
- The Mac Mini is now open and can be taken apart further.
In the next practical tip, we will show you how much power the Mac Mini consumes.