MacBook: Upgrading RAM Instructions
If you want your MacBook to perform better, upgrading the RAM helps many models. We show you how to do this.
MacBook: RAM upgrade - you need it
- You don't need a large tool to expand the RAM. A thin Phillips screwdriver is sufficient for most models.
- In order for the MacBook to work really smoothly, you should install at least 4 gigabytes of RAM. 8 gigabytes are worthwhile when using complex programs such as Photoshop or for gaming.
- When purchasing the RAM, make sure that it is compatible with your MacBook version.
MacBook: Upgrading RAM Instructions
Depending on the MacBook variant and year of construction, the RAM is installed slightly differently. However, the procedure is usually always similar.
- Turn off the MacBook completely, do not (!) Put the device to sleep.
- Turn the device over and loosen all screws on the bottom. The cover can then be easily removed.
- You will now find the main memory above the battery. This is usually freely accessible.
- For safety reasons, you should disconnect the battery before removing and installing it. To the right of the RAM you can see a slightly wider connector that connects the battery and the mainboard. Carefully pry the connector up with a toothpick or plastic card. You should not use metallic objects.
- Use your fingers to pull the plastic clips to the left and right of the working memory with a little pressure. The upper RAM module comes up and can be removed. Do the same for the second RAM module.
- Insert the new modules into the holder and press them down slightly until they snap into place. The battery can also be plugged in again.
- If you screw the MacBook back in, you have successfully upgraded your RAM.
You can read about the individual steps in this article.