Siemens: Error messages for washing machines - that is what they mean
If there is a problem with your Siemens washing machine, the device displays cryptic error messages consisting of letters and numbers. We'll show you what the errors mean.
Siemens washing machine: an overview of all error messages
In most cases, the error messages consist of a letter followed by two numbers. The codes are identical for all Siemens washing machines.
- F17 / E17: The inlet is blocked. Turn off the machine and turn off the tap. Remove the inlet hose from Hahn and clean the strainer. Note that there is still water in the hose.
- F18 / E18: the process is blocked. The drain hose is either blocked or kinked. Switch off the machine, disconnect the device from the power and unscrew the drain hose first on the tap and then on the machine. Let the water run into a bucket and clean the hose. Then start the "Drain" program.
- F23 / E23: There is water in the floor pan. This happens when the pump or seal is broken. You can take the machine off the power, open it and find the cause yourself. Alternatively, contact Siemens customer service.
- F29 / E29: Same error and procedure as for F17 / E17.
- F32 / E32: There was an imbalance in the drum during spinning. The washing machine turns slowly and stops the program later. The problem is often due to incorrect loading. Take out items of laundry or simply add some towels. The imbalance is rarely caused by the machine being tilted.
- F33 / E33: Too much foam has formed in the machine. If possible, open the flap and remove some foam. Otherwise, start the "Drain" program and then remove the foam. Next time use a little less detergent.
- F43 / E43: The drum cannot rotate, there is a problem with the motor. Remove the washing machine from the power for 5 minutes and start the program again. If the problem persists, you can contact Siemens customer service.
- F57 / E57: Another problem with the engine. Follow the solution to error F43 / E43.
- CL: The childproof lock is activated, the machine cannot be operated. Hold down the key symbol or look in the operating instructions.
- If an error code other than the one listed here occurs, it is a serious problem that you cannot solve yourself. In this case, you can also contact Siemens customer service.
Washing machine = sock monster? Your socks will disappear here
In the next practical tip, we will show you how to properly clean your washing machine.