Programming the Sky remote control: Instructions for SRC-40 & PRC-30
If you have a Sky receiver, you no longer need to use two remote controls. If you program the Sky remote control, you can operate the receiver and your television at the same time. We show you exactly how to do this in this practical guide.
Program the Sky remote control
Follow these instructions to program the SRC-40 or PRC-30 Sky remote control:
- Open this page and scroll down. Then select the code for your television from the list and write it down.
- Then turn on your TV with the original remote control until you get a picture.
- Now take the Sky remote control and hold the "TV" button for about five seconds until the status LED lights up.
- Now enter the five-digit code that you wrote down in the first step.
- If the entry is successful, the green LED lights up continuously. However, if this LED flashes, the code has not been recognized and you have to continue with step 3.
- Now hold the Sky remote control towards your television and hold the on / off button on the remote control until the television switches off.
- You can then switch on your TV using the Sky remote control. Then press various buttons to ensure that the remote control works.
