Sky + Receiver: Record a broadcast - how it works

You can easily record programs with your Sky + Receiver. However, a compatible hard disk must be connected.

Record programs with the Sky + Receiver

1. Open the "Guide" using the button of the same name on your remote control.
2. Select the desired station group - for example "Sky Sender".
3. Find the program you want to record and press the red "Rec" button. Recording starts automatically at the selected broadcast time - even if the receiver is switched off.

Program a series recording on the Sky + receiver

Some series can be recorded with the Sky + Receiver at regular intervals - provided that they are identified as series:

1. Open the "Guide".
2. Select a station category and search for an episode of the desired series.
3. The message "This is a series" appears. Select "Record all episodes".

View recorded programs

1. Press the "Menu" button.
2. Select the second tab "Recordings" and under it "Archive".
3. Find the desired program and press "OK".

Manage recordings on the Sky + Receiver

• Delete viewed programs: Go to the recordings, select a program and press the C button on your remote control. Confirm with "Yes".
• Release the viewed shipment: Instead of deleting a shipment right away, you can also release it. It is overwritten when a new recording starts and there is not enough free space on the hard disk. To do this, go to the recordings and select the appropriate program. Press the stop button (filled square) and confirm with "OK".
• Deleting a scheduled recording: If you do not want to record a program, press "Menu" and select the "Scheduled recordings" under the "Recordings" tab. Here you can see all programmed recordings. Press the C key and confirm with "Yes".

The instructions refer to the Sky + Receiver Humax PR-HD300C. Tip: Read how to order a film on Sky Select in this practical tip.