Sony Smartwatch 2: change bracelet - how it works
This practical tip explains how to change the wristband on your Sony Smartwatch 2. There are now a large number of wristbands for the Sony Smartwatch 2. From leather to metal to plastic.
How to change the bracelet on your Sony Smartwatch 2
To change the bracelet on your Sony Smartwatch 2, all you need is a thin flat-blade screwdriver. In the picture gallery you will find a picture with a description of each step.
- Turn the clock over and use a thin flat-blade screwdriver to push the old bracelet down a little until you see the metal pin.
- Where the metal pin is in the watch, you will see a small notch that goes around the metal pin. Insert the screwdriver into this notch.
- Now pull the screwdriver down along the metal pin. The pen is now released from the watch at this point.
- You can now pull the pen out of the old bracelet and insert it into the new bracelet.
- As soon as the pen is in the middle of the new bracelet, you have to hook the lower side of the pen into the watch.
- On the other side of the metal pin, put the screwdriver back into the notch. Then pull the pin down and insert it into the other side of the watch.
- For the other side of the bracelet, you need to repeat steps one through six on the other side of the watch.