Set up the Speedport Hybrid - how it works
Before you can surf the Internet, you must first set up your Speedport Hybrid. We show you how to do this in this practical tip.
Speedport Hybrid - how it works
- First unpack the device and connect it to the mains.
- Turn the router over and remove the cover at the bottom left. Insert the micro SIM there and close the cover again.
- For the first setup you should connect the PC with the included LAN cable. You can also connect telephones directly to the router.
- Now open the browser on your PC and enter "speedport.ip" in the address bar of the browser. Confirm with [Enter].
- You may need to enter the device password in the first step. You can find this on the bottom of the router.
- The assistant will guide you through the setup. In the first step, you have to enter your access data to set up an Internet connection.
- Click "Next" to go to the WLAN setup. Here you can change the name of the network and the associated password.
- You can then set up additional telephones and assign phone numbers. However, you can skip this with "Next".
- In the penultimate step, the reception strength of the LTE network is displayed. If this is too low, you should place the router directly on the window. Complete the wizard with "Next".