Configure Speedport W504V - how it works
Before you can go online with your Speedport W504V, you must first configure it. You can find out how to do this here in this practical tip.
Configure the Speedport router W504V - you have to do that
First connect your router to the power and connect it to the telephone socket. Then turn it on.
- For the first setup you have to connect the router to the PC via LAN. Then open the "speedport.ip" page in your browser on your PC.
- You have to log in for security. You can find the device password either on the bottom of the router or in your contract documents.
- Click "Step by Step" on the left to set up the router. In the first step you have to select "DSL connection with provider" and your provider.
- Then you have to enter the data of your connection. You will find these in your contract documents. Finally, tick the "Always online" checkbox below and save with "OK & Next".
- After the data has been checked, you still have to define your phone. Place a checkmark next to "Set up telephony with" and finally "Fixed network telephony". Save here again with "OK & Next".
- Now enter your phone data. You can also find these in the contract documents. You can add up to five different phone numbers. When you are finished, save with "OK & Next".
- In the next step you will get an overview of the configuration. Click on "OK" to complete the configuration.
- Under "Network"> "Security" you can also adjust the WLAN name and the security of the WLAN network. Tip: We will explain how to set up a WLAN access restriction.
On the next few pages you will read how to display the call list in the Speedport interface and how to enable ports in the router.