Set up and configure the Speedport W701V - how it works

This practical tip shows you how to set up your Speedport W701V and what you need to consider.

Set up the Speedport W701V correctly

The Speedport W701V is a DSL router. It can be connected to a telephone connection. Please note: This modem supports ADSL and ADSL2 +, i.e. transmission rates of up to 16 Mbit per second. If you have a VDSL connection, i.e. a speed of up to 50 MBit per second, we advise you to use a different router.

1. Connect the power cord to the wall outlet.
2. Connect the DSL cable to the router and the telephone socket (use TAE adapter) or the splitter. The cable is plugged into the DSL socket on the router.
3. Wait until the green DSL LED lights up permanently.
4. The router is now ready for configuration.

Configuration of the speed port: you have to consider that

To configure the Speedport, you need a computer with WLAN or LAN connection. You need a LAN cable to connect via LAN. To connect via WLAN, you can read the WLAN data on the back of the router and enter it in your computer.

1. Connect your computer to the router using one of the two methods mentioned.
2. Open your internet browser and enter "speedport.ip" or.
3. Then enter the default password "0000". You should now be logged in to the router.
4. It is advisable to use the assistant for the initial setup. This is started by clicking on "step by step".
5. You can change the device password in the wizard.
6. In the next step, you have to select your provider and enter your access data, which you have received separately by post or email.
7. You can also set up a landline connection in the wizard.
8. When you have gone through all the steps of the wizard, the configuration is complete and you can start surfing.