Setting up the Speedport W723V - Here's how it works
Before you can surf the Internet, you must first set up your Speedport W723V. In this practical tip, we will show you how to do this.
Setting up the Speedport W723V - you have to do that
First connect your router to the mains and connect it to the DSL connection. You will find the necessary steps in the enclosed instructions for your Speedport router.
- Then connect the router and the PC with a LAN cable and switch on both devices.
- Open your web browser and enter "speedport.ip" in the address bar.
- For security, you must log in with the device password. You can find this on the bottom of the router.
- After registration, click on "Step by Step" under "Assistant" on the left. Confirm with "OK & Next".
- Now you have to enter your internet connection. To do this, check the box "DSL connection with provider" and select your provider from the list (see picture).
- You must also enter the access data you received from your provider. You will find these in your contract documents. Then click on "OK & Next".
- Now it's up to the telephony facility. First check "Set up telephony with" and then "DSL telephony". Confirm here also with "OK & Next".
- In the next step, enter your phone number and tick the "Always activate online" checkbox. Confirm again with "OK & Next".
- Finally, you have to confirm the entered data. If they are correct, confirm them with "OK". Then the setup is complete.