Tolino does not concern - it may be because of it
If you no longer concern Tolino, this can have various causes. Usually the problem can be solved quite easily. We'll show you how to bring your reader back to life.
Charge Tolino properly
- The first thing to do is to make sure the Tolino battery is charged. Connect the reader to the power supply and let it recharge for about half an hour.
- Now hold down the power button for about six seconds.
- Then press the button again and switch the device on again.
Reset Tolino with a soft reset
If the reader can no longer be switched on, reset the device. No data will be deleted.
- Next to the connection for charging there is a small round hole in which the reset button is located. On the Tolino Shine you will find the reset button under the flap at the power connection.
- Press the button with a suitable object, such as a paper clip, until the device restarts.
Reset Tolino via hard reset
If the soft reset is not successful, you can try a hard reset. However, all e-books and settings will be deleted from the Tolino.
- Press and hold the volume up and power button for ten seconds or until you see the reboot screen.
- Press the on / off button for a moment. You should now be in recovery mode.
- Use the volume up and volume down buttons to select the "Wipe Data / Factory Reset" item and confirm the selection with the on / off button.
- Confirm that you want to delete all data by pressing the on / off button again.
- With "reboot system now" you restart your reader.
On the next page we will show you how to read Amazon eBooks on the Tolino.