Set up the TP Link M5350 - how it works
Related Videos: TP-LINK 3G | How to configure TP-Link M5250, M5350 (3G) (May 2024).
Before you can go online, you must first set up your TP Link M5350. We show you how to do this in this practical tip.
Set up the TP Link M5350 - so it'll work
- First carefully remove the cover of the router and take out the battery.
- Then insert the SIM card and reinsert the battery. Then close the cover.
- Press and hold the [Power] button until "TP Link" appears on the display.
- Search for the router on your PC in the WiFi network. The full name and the WiFi password can be found on the bottom of the TP Link.
- Establish a WLAN connection with the router and open the page "192.168.0.1" in your browser.
- Enter "admin" as the user name and password and click on "Log in".
- To start the setup, click on "Wizard" and then select "Next" at the bottom right.
- In the next step you have to enter the connection data of the SIM card so that an internet connection can be established. Confirm with "Next".
- You can then adjust the WLAN settings or leave them as they are. Confirm with "Next".
- Finally you see a summary, which you confirm with "Finish". Then the setup is complete.
In our next practical tip, read how you can change the TP Link password.