Unitymedia: error message 1090 with the Horizon HD recorder - what to do?
If you receive error message 1090 on your Horizon HD Recorder, this may be due to faulty cabling. In this practical tip we will tell you what you can do about it.
Unitymedia's Horizon HD Recorder shows error 1090 - what to do?
So that you can watch TV again quickly, we have put together the following tips for you to fix the error:
- First, take a look at the wiring from your Horizon receiver. All connections must be seated correctly here.
- In addition, the cables must be intact and have no defects or broken cables. If this is the case, the affected cable must be replaced immediately.
- Make sure that the antenna cable is connected to the "Data" socket of your antenna connection. If you don't have a "Data" socket, try the left socket.
- An adapter for the antenna socket should be included with your receiver. Try this if the error persists.
- Simply plug it into the antenna socket and finally connect the receiver to the adapter. After restarting the receiver, the error should have disappeared.
- Error 1090 also means that the Horizon receiver is currently setting up. So wait a bit.
- If the problem persists, call Unitymedia customer service by phone. You can find the number in this article.