Unitymedia: Enable ports in the router supplied - how it works

Only a few clicks are required to enable the ports in Unitymedia in the router. Find out exactly how to do this in this practical tip.

Unity ports in Unitymedia in the router - so it'll work

1. Open your browser and enter "192.168.0.1" in the address bar.
2. If you have secured your router with a password, you must now enter it.
3. First click on the "Advanced" setting above.
4. Select the "Forwarding" option on the left.
5. Enter the respective port under "Public port range" and the IP address of your PC under "Local IP address". This is usually 192.168.0.100.
6. Under "Destination port range" enter the same port as in the first field. Finally, select the respective protocol.
7. The changes are accepted with "Save".

Find out in the next practical tip how to set up WLAN at Unitymedia.